| CONTENTS OF MECCANO OUTFITS 2A-4A 1927-1932 epoch | ||||||||||||||||||||||
| 18-Jan-04 | Entry Date> | |||||||||||||||||||||
| No. | Description | 1928 set2 | 2a | 3a | 4a | |||||||||||||||||
| 1927 | 1928 | 1929 | 1930 | 1931 | 1927 | 1928 | 1929 | 1930 | 1931 | 1927 | 1928 | 1929 | 1930 | 1931 | ||||||||
| 1 | Perforated Strip, 12½" | 10 | 2 | 2 | 2 | 4 | 4 | 4 | 6 | 6 | ||||||||||||
| 1a | Perforated Strip, 9½" | |||||||||||||||||||||
| 1b | Perforated Strip, 7½" | 2 | 2 | |||||||||||||||||||
| 2 | Perforated Strip, 5½" | 14 | 4 | 4 | 4 | 4 | 4 | 3 | 3 | 3 | 3 | 3 | 5 | 5 | 5 | 5 | 5 | |||||
| 2a | Perforated Strip, 4½" | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | |||||||||||
| 3 | Perforated Strip, 3½" | 2 | 4 | 4 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | ||||||||||
| 4 | Perforated Strip, 3" | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | ||||||
| 5 | Perforated Strip, 2½" | 12 | 6 | 6 | 6 | 6 | 6 | 18 | 18 | 18 | 18 | 18 | ||||||||||
| 6 | Perforated Strip, 2" | 4 | 4 | 4 | 4 | 4 | ||||||||||||||||
| 6a | Perforated Strip, 1½" | 2 | 4 | 4 | 4 | 4 | 4 | |||||||||||||||
| 7 | Angle Girders, 24½" | |||||||||||||||||||||
| 7a | Angle Girders, 18½" | |||||||||||||||||||||
| 8 | Angle Girders, 12½" | 4 | 4 | 4 | 4 | 4 | 4 | 1 | 1 | 1 | 1 | 5 | 5 | 5 | 5 | 5 | ||||||
| 8a | Angle Girders, 9½" | 4 | 4 | 4 | 4 | 4 | ||||||||||||||||
| 8b | Angle Girders, 7½" | 2 | 2 | |||||||||||||||||||
| 9 | Angle Girders, 5½" | 4 | 4 | 4 | 4 | 4 | ||||||||||||||||
| 9a | Angle Girders, 4½" | |||||||||||||||||||||
| 9b | Angle Girders, 3½" | |||||||||||||||||||||
| 9c | Angle Girders, 3" | |||||||||||||||||||||
| 9d | Angle Girders, 2½" | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 9e | Angle Girders, 2" | |||||||||||||||||||||
| 9f | Angle Girders, 1½" | |||||||||||||||||||||
| 10 | Fish Plates | 8 | 1 | 1 | 1 | 1 | 3 | 3 | 3 | 3 | 3 | |||||||||||
| 11 | Double Brackets | 4 | 1 | 1 | 1 | 1 | 1 | 3 | 3 | 3 | 3 | 3 | ||||||||||
| 12 | Angle Brackets, ½"x½" | 12 | 2 | 2 | 2 | 2 | 2 | 8 | 8 | 8 | 8 | 8 | 14 | 14 | 14 | 14 | 14 | |||||
| 12a | Angle Brackets, 1"x1" | 2 | 1 | 2 | 2 | 2 | 2 | 1 | 2 | 2 | 2 | 2 | ||||||||||
| 12b | Angle Brackets, 1"x½" | |||||||||||||||||||||
| 13 | Axle Rods, 11½" | 1 | 1 | 1 | 1 | 1 | 1 | |||||||||||||||
| 13a | Axle Rods, 8" | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 14 | Axle Rods, 6½" | 3 | 3 | 3 | 3 | 3 | ||||||||||||||||
| 15 | Axle Rods, 5" | 2 | 2 | 2 | 2 | 2 | 2 | |||||||||||||||
| 15a | Axle Rods, 4½" | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | ||||||||||
| 16 | Axle Rods, 3½" | 4 | 1 | 1 | 1 | 1 | 1 | |||||||||||||||
| 16a | Axle Rods, 2½" | 3 | 3 | |||||||||||||||||||
| 16b | Axle Rods, 3" | |||||||||||||||||||||
| 17 | Axle Rods, 2" | 2 | 3 | 3 | 3 | 3 | 3 | |||||||||||||||
| 18a | Axle Rods, 1½" | 4 | ||||||||||||||||||||
| 18b | Axle Rods, 1" | |||||||||||||||||||||
| 19 | Crank Handles, 5" shaft | 1 | ||||||||||||||||||||
| 19s | Crank Handles, 3½" shaft | 1 | ||||||||||||||||||||
| 19a | Spoked Wheel, 3" diam. | 4 | 4 | 4 | 4 | 4 | ||||||||||||||||
| 19b | Pulley Wheels, 3" with set screws | 4 | ||||||||||||||||||||
| 20 | Flanged Wheels, 1½" diameter | 4 | 4 | 4 | 4 | 8 | 8 | |||||||||||||||
| 20a | Pulley Wheels, 2" with set screws | 2 | 2 | 2 | 2 | |||||||||||||||||
| 20b | Flanged Wheels, 3/4" diameter | 4 | 4 | 4 | ||||||||||||||||||
| 21 | Pulley Wheels, 1½" with set screws | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||||||||
| 22 | Pulley Wheels, 1" with set screws | 4 | ||||||||||||||||||||
| 22a | Pulley Wheels, 1" without.. | 2 | 1 | 1 | 1 | 1 | 1 | |||||||||||||||
| 23 | Pulley Wheels, ½" without.. | 1 | 2 | 2 | 2 | 2 | 2 | |||||||||||||||
| 23a | Pulley Wheels, ½" with.. | 1 | 1 | |||||||||||||||||||
| 24 | Bush Wheels, 8 holes | 1 | 1 | 1 | 1 | 1 | 1 | |||||||||||||||
| 25 | Pinion Wheels, 3/4" diam., ¼" wide | |||||||||||||||||||||
| 25a | Pinion Wheels, 3/4" diam., ½" wide | |||||||||||||||||||||
| 26 | Pinion Wheels, ½" diam., ¼" wide | 2 | 2 | 2 | 2 | 2 | 1 | 1 | 1 | 1 | 1 | |||||||||||
| 26a | Pinion Wheels, ½" diam., ½" wide | |||||||||||||||||||||
| 27 | Gear Wheels, 50 teeth | |||||||||||||||||||||
| 27a | Gear Wheels, 57 teeth | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||||||||||
| 27b | Gear Wheels, 133 teeth 3½" diam. | |||||||||||||||||||||
| 28 | Contrate Wheels 1½" diam. | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 29 | Contrate Wheels 3/4" diam. | 2 | 2 | 2 | 2 | 2 | ||||||||||||||||
| 30 | Bevel Gears, 7/8", 26 teeth | |||||||||||||||||||||
| 30a | Bevel Gears, ½", 16 teeth | |||||||||||||||||||||
| 30c | Bevel Gears, 1½", 48 teeth | |||||||||||||||||||||
| 31 | Gear Wheels, 1", 38 teeth | |||||||||||||||||||||
| 32 | Worms | 1 | 1 | 1 | 1 | 1 | 1 | 1 | ||||||||||||||
| 34 | Spanners | 1 | 1 | 1 | 1 | 1 | 1 | |||||||||||||||
| 35 | Spring Clips | 14 | 5 | 5 | 5 | 5 | 5 | |||||||||||||||
| 36 | Screwdrivers | 1 | ||||||||||||||||||||
| 36b | Screwdrivers (special) | |||||||||||||||||||||
| 37 | Nuts & Bolts, 7/32" | 49 | 35 | 35 | 34 | 34 | 34 | 40 | 40 | 32 | 32 | 32 | 45 | 45 | 43 | 43 | 43 | |||||
| 37a | Nuts | 6 | ||||||||||||||||||||
| 38 | Washers | 14 | 10 | 10 | 10 | 10 | 10 | |||||||||||||||
| 40 | Hanks of Cords | 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | |||||
| 41 | Propeller Blades | 2 | 2 | 2 | 2 | 2 | ||||||||||||||||
| 43 | Tension Spring, 2" long | 1 | 1 | 1 | 1 | |||||||||||||||||
| 44 | Cranked Bent Strips | 1 | ||||||||||||||||||||
| 45 | Double Bent Strips | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||||||||
| 46 | Double Angle Strips, 2½"x1" | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | ||||||
| 47 | Double Angle Strips, 2½"x1½" | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 47a | Double Angle Strips, 3"x1½" | 2 | 2 | 2 | 2 | 2 | ||||||||||||||||
| 48 | Double Angle Strips, 1½"x½" | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 48a | Double Angle Strips, 2½"x½" | 8 | 2 | 2 | 2 | 2 | 2 | |||||||||||||||
| 48b | Double Angle Strips, 3½"x½" | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 4 | |||||||||||
| 48c | Double Angle Strips, 4½"x½" | |||||||||||||||||||||
| 48d | Double Angle Strips, 5½"x½" | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | |||||||||||
| 50a | Eye Pieces with Boss (Slide piece) | 1 | 1 | 1 | 1 | |||||||||||||||||
| 52 | Perforated Flanged Plates, 5½"x2½" | 1 | 1 | 1 | 1 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | ||||||||||
| 52a | Perforated Flate Plates, 5½"x3½" | 2 | 2 | 4 | 4 | |||||||||||||||||
| 53 | Perforated Flanged Plates, 3½"x2½" | 3 | 3 | 3 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | |||||||||||
| 53a | Perforated Flate Plates, 4½"x2½" | 2 | 2 | |||||||||||||||||||
| 54 | Perforated Flanged Sector Plates, 4" | 2 | 1 | 1 | 1 | |||||||||||||||||
| 55 | Perforated Strips, Slotted, 5½" | |||||||||||||||||||||
| 55a | Perforated Strips, Slotted, 2" | |||||||||||||||||||||
| 57 | Hooks, 1911 version | 1 | 1 | 1 | 1 | 1 | 1 | |||||||||||||||
| 57b | Hooks, Loaded | |||||||||||||||||||||
| 57c | Hooks, Loaded, Small | |||||||||||||||||||||
| 58 | Spring Cord | |||||||||||||||||||||
| 58a | Coupling Screw for Spring Cord | |||||||||||||||||||||
| 58b | Hook for Spring Cord | |||||||||||||||||||||
| 59 | Collars with Set Screws | 4 | 4 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 3 | 3 | 3 | 9 | 9 | ||||||
| 61 | Windmill Sails (now obselete) | 4 | 4 | 4 | ||||||||||||||||||
| 62 | Cranks | 2 | ||||||||||||||||||||
| 62a | Cranks, Threaded | |||||||||||||||||||||
| 62b | Double Arm Cranks | 2 | 2 | |||||||||||||||||||
| 63 | Couplings | 1 | 1 | 1 | 1 | 1 | 5 | 5 | 5 | 5 | 5 | |||||||||||
| 63b | Couplings, strip/rod | |||||||||||||||||||||
| 64 | Threaded Bosses | |||||||||||||||||||||
| 65 | Centre Forks | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 70 | Perforated Flate Plates, 5½"x2½" | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 72 | Perforated Flate Plates, 2½"x2½" | |||||||||||||||||||||
| 76 | Perforated Triangular Plates, 2½" | |||||||||||||||||||||
| 77 | Perforated Triangular Plates, 1" | 2 | 2 | 2 | 2 | 2 | ||||||||||||||||
| 78 | Srewed Rods, 11½" | |||||||||||||||||||||
| 80 | Srewed Rods, 5" | |||||||||||||||||||||
| 80a | Srewed Rods, 3½" | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 80b | Srewed Rods, 4½" | |||||||||||||||||||||
| 81 | Srewed Rods, 2" | |||||||||||||||||||||
| 82 | Srewed Rods, 1" | |||||||||||||||||||||
| 89 | Curved Strips, 5½" | 4 | 4 | 4 | 4 | 4 | ||||||||||||||||
| 90 | Curved Strips, 2½" | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | ||||||
| 90a | Curved Strips, 2½", Cranked | 4 | ||||||||||||||||||||
| 94 | Sprocket Chain, 40" lengths | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 95 | Sprocket Wheels 2" | 1 | 2 | 2 | 2 | 2 | ||||||||||||||||
| 95a | Sprocket Wheels 1½" | 2 | 2 | 2 | 2 | |||||||||||||||||
| 95b | Sprocket Wheels 3" | 2 | 2 | 2 | 2 | |||||||||||||||||
| 96 | Sprocket Wheels 1" | 2 | 2 | 2 | 2 | 2 | ||||||||||||||||
| 96a | Sprocket Wheels 3/4" | 1 | 1 | |||||||||||||||||||
| 97 | Braced Girders, 3½" | |||||||||||||||||||||
| 98 | Braced Girders, 2½" | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 99 | Braced Girders, 12½" | 2 | 2 | 2 | 2 | 2 | 2 | |||||||||||||||
| 99a | Braced Girders, 9½" | |||||||||||||||||||||
| 99b | Braced Girders, 7½" | |||||||||||||||||||||
| 100 | Braced Girders, 5½" | 2 | 4 | 4 | 4 | 4 | 4 | 1 | 1 | 1 | 1 | 1 | ||||||||||
| 101 | Heald for Loom | |||||||||||||||||||||
| 102 | Single Bent Strips | 2 | 2 | 2 | 1 | 1 | ||||||||||||||||
| 103 | Flat Girders, 5½" | |||||||||||||||||||||
| 103a | Flat Girders, 9½" | |||||||||||||||||||||
| 103b | Flat Girders, 12½" | |||||||||||||||||||||
| 103c | Flat Girders, 4½" | |||||||||||||||||||||
| 103d | Flat Girders, 3½" | |||||||||||||||||||||
| 103e | Flat Girders, 3" | |||||||||||||||||||||
| 103f | Flat Girders, 2½" | 2 | 2 | 2 | 2 | 2 | 2 | 2 | ||||||||||||||
| 103g | Flat Girders, 2" | |||||||||||||||||||||
| 103h | Flat Girders, 1½" | |||||||||||||||||||||
| 103k | Flat Girders, 7½" | |||||||||||||||||||||
| 106 | Wood Roller (complete w. Rod & two Collars) | |||||||||||||||||||||
| 107 | Meccanograph designing table | |||||||||||||||||||||
| 108 | Architraves | 2 | 2 | 2 | 2 | 2 | ||||||||||||||||
| 109 | Face Plates, 2½" diam. | 1 | 1 | |||||||||||||||||||
| 110 | Rack Strips, 3½" | |||||||||||||||||||||
| 111 | Bolts, 3/4" | 2 | 2 | 2 | 2 | 2 | 1 | 1 | 1 | 1 | 1 | |||||||||||
| 111a | Bolts, ½" | |||||||||||||||||||||
| 111c | Bolts, 3/8" | 6 | ||||||||||||||||||||
| 114 | Hinges | |||||||||||||||||||||
| 115 | Threaded Pins | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 116 | Fork Pieces, Large | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 116a | Fork Pieces, Small | 1 | 1 | 1 | 1 | |||||||||||||||||
| 118 | Hub Discs, 5½" diam | |||||||||||||||||||||
| 120b | Compression Springs | |||||||||||||||||||||
| 124 | Reversed Angle Brackets, 1" | |||||||||||||||||||||
| 125 | Reversed Angle Brackets, ½" | 4 | ||||||||||||||||||||
| 126 | Trunnions | 2 | 2 | 2 | 2 | 2 | ||||||||||||||||
| 126a | Flat Trunnions | 2 | 2 | 2 | 2 | 2 | 2 | 1 | 1 | 1 | 1 | 1 | ||||||||||
| 128 | Boss Bell Cranks | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 129 | Rack Segments, 3" diam. | |||||||||||||||||||||
| 130 | Triple Throw Eccentrics | 2 | 2 | 2 | 2 | 2 | ||||||||||||||||
| 132 | Flywheels, 2 3/4" diam. | |||||||||||||||||||||
| 133 | Corner Brackets, 1½" diam. | |||||||||||||||||||||
| 134 | Crank Shafts, 1" stroke | 1 | 1 | 1 | ||||||||||||||||||
| 136 | Handrail Supports | |||||||||||||||||||||
| 137 | Wheels Flanges | |||||||||||||||||||||
| 138 | Ship's Funnel, Raked | 1 | 1 | 1 | ||||||||||||||||||
| 140 | Universal Couplings | |||||||||||||||||||||
| 142a | Motor Tyres, 2" | 4 | 4 | |||||||||||||||||||
| 142b | Motor Tyres, 3" | |||||||||||||||||||||
| 143 | Circular Girders, 5½" diam. | |||||||||||||||||||||
| 144 | Dog Clutches | |||||||||||||||||||||
| 145 | Circular Strips, 7½" diam. | |||||||||||||||||||||
| 146 | Circular Plates, 6" diam. | |||||||||||||||||||||
| 147a | Pawls | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 147b | Pivot Bolt with 2 Nuts | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 148 | Rachet Wheels | 1 | 1 | 1 | 1 | 1 | ||||||||||||||||
| 155 | Rubber Rings, 5/8" | |||||||||||||||||||||
| 157 | Fans, 2" diam. | |||||||||||||||||||||
| 159 | Circular Saw (obsolete from 1934) | 1 | 1 | 1 | ||||||||||||||||||
| 160 | Channel Bearings, 1½"x1"x½" | 1 | 1 | 1 | 1 | |||||||||||||||||
| 161 | Girder Brackets, 2"x1"x½" | |||||||||||||||||||||
| 162 | Boiler with Ends, complete | 1 | 1 | 1 | 1 | |||||||||||||||||
| 162a | Boiler Ends | |||||||||||||||||||||
| 163 | Sleeve Pieces | 2 | 2 | 2 | 2 | |||||||||||||||||
| 164 | Chimney Adaptors | 1 | 1 | 1 | 1 | |||||||||||||||||
| 165 | Swivel Bearings | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | |||||||||||||
| 166 | End Bearings | 1 | 1 | 1 | 1 | |||||||||||||||||
| 168 | Ball Thrust Bearing, 4" diam. | |||||||||||||||||||||
| 169 | Digger Buckets | 1 | 1 | 1 | ||||||||||||||||||
| 170 | Eccentrics, ¼" Throw | |||||||||||||||||||||
| 171 | Socket Couplings | |||||||||||||||||||||